60-Series Corner-Auger Grain Carts

Model Number		1160	1060	860	760
*Bushel capacities were measured with #2 corn at 15% moisture (56 lb. test weight) Due to continuing improvements in the design and manufacture of Unverferth products, all specifications contained herein are subject to change without notice.
Capacity (bushels)		1,100	1,000	850	750
Minimum Tractor H.P.		200	200	180	150
Loaded Tongue Weight (lbs)		4,800	4,700	5,550	4,990
Empty Tongue Weight (lbs)		1,500	1,450	1,350	1,200
Auger Diameter		20″	20″	18″	18″
Unload Speed (bushels/min.)		500	500	450	450
Flighting Thickness		7/16″	7/16″	7/16″	7/16″
Hub Size/Spindle Diameter		10 bolt – 4 1/2″	10 bolt – 4 1/2″	10 bolt – 4 1/2″	10 bolt – 4 1/2″
Hydraulic Remotes Required		3	3	3	3
Front/Rear Slopes (degrees)		39 – 34	39 – 34	39 – 34	39 – 34
Hopper Length		21′ 6″	21′ 6″	16′	16′
Hopper Width		13′	11′ 10″	11′ 10″	11′ 10″
Auger Side Reach Max	Measured to Inside Edge of Rubber Spout	9′ 9″	9′ 9″	9′ 2″	9′ 2″
Auger Side Reach Min	Measured to Inside Edge of Rubber Spout	7′ 3″	7′ 3″	7′ 2″	7′ 2″
Overall Transport Length		29′ 7″	29′ 7″	27′ 7″	27′ 7″
Hitch to Center of Axle		16′ 10″	16′ 10″	15′ 7″	15′ 7″
Single Wheels and Tires
Measured Undercarriage		Adj. Axle 1050/50×32	Rigid Axle 900/65×32	Rigid Axle 800/65×32	Rigid Axle 800/65×32
Empty Weight (lbs)		14,500	13,050	12,750	11,450
Hitch Height		1′ 10″	1′ 10″	1′ 10″	1′ 10″
Hopper Height Low Side		11′ 8″	11′ 8″	11′ 3″	11′
Hopper Height High Side		12′ 7″	12′ 6″	12′ 3″	12′
Auger Height with Spout Straight Down		13′	13′	12′ 11″	12′ 11″
Height to Top of Auger in Unload Position		17′ 11″	17′ 11″	17′ 11″	17′ 11″
Width Outside of Tires		14′ 6″	14′ 4″	12′ 10″	12′ 10″
Center of Tire to Center of Tire		11′ 3″ min./12′ 9″ max.	11′ 2″	10′	10′
Under Frame Clearance		1′ 5″	1′ 5″	1′ 5″	1′ 5″
Tracks
Measured Undercarriage		36″x112″ Auto-Tension	36″x112″ Auto-Tension	36″x112″ Auto-Tension	N/A
Empty Weight (lbs)		21,500	21,000	19,200	–
Hitch Height		1′ 5″	1′ 5″	1′ 5″	–
Hopper Height Low Side		11′ 1″	11′ 1″	11′ 3″	–
Hopper Height High Side		12′ 2″	12′ 1″	12′ 3″	–
Auger Height with Spout Straight Down		12′ 11″	12′ 11″	12′ 10″	–
Height to Top of Auger in Unload Position		17′ 7″	17′ 7″	17′ 8″	–
Width Outside of Tracks		13′ 11″	13′ 11″	13′ 7″	–
Center of Track to Center of Track		10′ 11″	10′ 11″	10′ 7″	–
Under Frame Clearance		1′ 1″	1′ 1″	1′ 4″	–
Loaded Tire Ground Pressure – P.S.I. calculated at the 3″ penetration level. For use as a comparitive guide in choosing between various tire/track options.
Model Number		1160	1060	860	760
42″x131″ Equalizer Tracks		10.70
36″x148″ Hydraulic Tension Tracks		9.48
36″x131″ Hydraulic Tension Tracks		12.00
36″x112″ Auto-Tension Tracks		13.64	12.80	11.37
480/80×46 Straddle Duals			18.17
420/80×46 Straddle Duals				18.22	16.28
520/85×42 Straddle Duals			15.79	13.02	11.63
480/80×42 Straddle Duals				15.62	13.96
520/85×38 Straddle Duals					24.44
IF 1250/50×32 (188A8)		16.36	15.01
1250/50×32 (201A8)		16.36	15.01
1250/50×32 (188A8)		17.99	16.40
1050/50×32		19.61	18.03
900/70×32		23.56
900/65×32		23.10	21.23	17.50	15.63
900/60×32			24.44	20.14	17.99
800/65×32				22.93	20.48
800/60×32				26.37	23.55
650/75×32					22.67

60-Series Corner-Auger Grain Carts

Call for Pricing

Similar Products

X-Treme Front-Fold Auger Grain Carts

Mid-Size Corner Auger Grain Carts

20-Series Dual-Auger Grain Carts